Hoist Comparison Table
Full specs across the range, plus what each model is actually best suited to. Click any hoist to view the full product page.
← Swipe to compare models →
4.5T 2 Post Hoist
2 Post
View Product →
|
5T 2 Post Hoist
2 Post
View Product →
|
6T 2 Post Hoist
2 Post
View Product →
|
5.5T 4 Post Hoist
4 Post
View Product →
|
|
|---|---|---|---|---|
CAPACITY |
4,500 kg(4.5 Tonne) | 5,000 kg(5 Tonne) | 6,000 kg(6 Tonne) | 5,500 kg(5.5 Tonne) |
LIFTING TYPE |
2 Post | 2 Post | 2 Post | 4 Post |
MAX LIFT HEIGHT |
1,900 mm | 1,900 mm | 1,850 mm | 1,850 mm |
MIN LIFT HEIGHT |
105 mm | 105 mm | 110 mm | 218 mm |
OVERALL HOIST HEIGHT |
3,900 mm | 4,440 mm | 3,832 mm | 2,120 mm |
PASSING THROUGH WIDTH |
2,830 mm | 2,960 mm | 3,000 mm | 3,110 mm |
OVERALL MACHINE WIDTH |
3,420 mm | 4,150 mm | 3,600 mm | 3,650 mm |
MOTOR POWER |
2.2 kW | 3.0 kW | 3.0 kW | 3.0 kW |
POWER SUPPLY |
240V / 415V(Single/Three Phase) | 240V / 415V(Single/Three Phase) | 220V / 380V(Single/Three Phase) | 240V / 415V(Single/Three Phase) |
RAISING TIME |
≤ 50 s | ≤ 50 s | ≥ 55 s | ≤ 50 s |
LOWERING TIME |
≥ 20 s | ≥ 20 s | 20 – 40 s | ≥ 20 s |
NOISE LEVEL |
≤ 75 dB | ≤ 75 dB | ≤ 75 dB | ≤ 75 dB |
LOCKING SYSTEM |
AutomaticSolenoid Release | AutomaticSolenoid Release | Automatic(Safety Locks) | Manual Safety Locks |
BEST SUITED FOR |
Workshops, 4WDs, Passenger Vehicles & Light Commercial | Larger 4WDs, Utes, Pickups, Vans & Light Commercial | Heavy 4WDs, American Trucks, Commercial Vans & Fleet | Wheel Alignments, Storage, Tyre Work, Low Vehicles & Workshops with Limited Space |
FAQ
Installation & Site Requirements
A reinforced concrete slab with a minimum thickness of 150 mm is generally required. The concrete must be level, structurally sound and suitable for the hoist anchors. Final requirements should be confirmed by the installer before installation.
The required ceiling height depends on the hoist model.For example, the 4.5T hoist has an overall height of approximately 3,900 mm. We recommend allowing additional clearance above the hoist and considering the height of the vehicle when raised. Always confirm your available ceiling height before ordering.
Yes. A 2-post hoist relies heavily on a suitable reinforced concrete slab because the columns are anchored directly into the floor. A 4-post hoist distributes the vehicle’s weight across four columns, although anchoring and slab requirements still depend on the specific model and installation instructions.
TTN Industrial hoists should be installed in a covered, dry and weather-protected area. Rain, direct sunlight, excessive moisture and harsh outdoor conditions may damage electrical and hydraulic components and could affect warranty coverage.
Professional Installation
Yes. We have access to qualified hoist installers across Australia and can help connect you with an installer in your area.
A straightforward installation can usually be completed within one working day.Additional time may be required where:
- The site needs preparation
- The concrete slab needs to be assessed
- Electrical work is required
- Additional anchoring or structural work is needed
For safety, correct operation and warranty purposes, professional installation by a qualified hoist installer is strongly recommended.
Installation pricing depends on:
- The hoist model
- Your location
- The condition of the installation site
- Concrete suitability
- Electrical requirements
- Travel and access
- Any additional site preparation
A quote can be arranged once your site details have been confirmed.
Can usually be between $1000-$2200
Delivery & Shipping
Orders are typically processed within 1–2 business days. Delivery times vary depending on your location, but most orders arrive within approximately 3–7 business days after dispatch. Tracking details will be provided once your order has been shipped.
A forklift is usually the easiest option for unloading a vehicle hoist.Where a forklift is unavailable, we may be able to arrange a delivery vehicle with suitable unloading facilities. Please contact us before dispatch so the correct delivery arrangements can be confirmed.
Power & Electrical Requirements
Our hoists are available with single-phase or three-phase power options, depending on the model.Please select the correct power option for your workshop or garage when ordering. Electrical installation should be completed by a suitably qualified electrician.
Warranty & After-Sales Support
Yes. The hoist is covered by the applicable TTN Industrial product warranty.Our Australian support team is also available to assist with:
- Replacement parts
- Servicing questions
- Installation support
- Troubleshooting
- General after-sales assistance